Hazardous goods case with half mask

n }}Clear discn }}Headband blackn }}Anti-fogn }}

For immediate rinsing of the eye in the event of chemical contamination and foreign particles Gentle rinsing from 6-jet shower head through ergonomically shaped, easily visible eye support ring for controlled rinsing of the eye How to use 1. Twist and remove the top cap 2. Turn the bottle upside down. Turn the base part in one direction with a strong twisting motion until the liquid comes out of the rinsing head. 3. Place the bottle on the eye with the spray head facing downwards and rinse. If necessary, hold the eye open with your fingers. Why buffered solutions? Buffered rinsing solutions help to neutralise acid or alkali splashes in the eye and normalise the pH value in the eye. These "buffered solutions" are therefore many times more effective than water or purely isotonic solutions. Buffered solutions are also suitable for neutralising rinsing in the event of skin burns. Eye injuries in the workplace Eye injuries happen in all areas of work and every company should be prepared to deal with an eye accident in the workplace. After all, if an employee injures their eye, this can result in serious damage or loss of vision. This applies in particular to workplaces where cleaning agents, hydraulic oils, solvents, acids, alkalis or other aggressive liquids or substances are used. There is also always a risk of eye injuries in work areas where foreign bodies such as swarf, dust or dirt particles are produced. Rapid and copious rinsing dilutes the contaminants and flushes them out. Quick access to an eyewash bottle should therefore be available. Because: In the event of eye injuries, just a few seconds can decide whether vision is impaired or even lost! Caution! In the case of splinter injuries, the eye should not be rinsed but immobilised with a suitable dressing. The injured person should consult an ophthalmologist as soon as possible.

Comfortable fit with optimum safetyMaterial: Mask body silicone rubberColour: Black / Neon green

Suitable filters for half mask BLS 4000S and full face mask BLS 5700.Depending on the filter type, protection against dust, inorganic and acid gases, vapours, ammonia and ammonia derivatives

Areas of application Protection against hazardous dusts (type 5), light liquid splashes (type 6) and radioactive, contaminated particles (EN 1073-2:2002). Storage work, light cleaning work, machine maintenance, asbestos inspection and disposal, insulation work, cement production, grinding and polishing. Product characteristics Material: Suit: SMS polypropylene Zip: Metal / nylon / polyester tape Elasticated rubbers: Synthetic elastomer Sewing thread: Polyester / Cotton (This product does not contain any components made of natural rubber - latex.) Colour: White Standardisation: Category III. type 5 (EN 13982-1), type 6 (EN 13034) and EN 1073-2:2002 Also available in the colours blue, orange and red on request (PU 20 pieces per colour and size)